WPC Chaukhat Sizes: How To Choose The Right Frame

Greenplastwood · SNG Eco India Pvt. Ltd. · Updated October 2026

A WPC chaukhat (door frame) size is written as width × thickness in millimetres. The width is chosen to suit the wall, and the thickness to suit the weight of the door. This guide explains how to select the right frame from the Greenplastwood range.

WPC door frame profile samples with a measuring tape and drawings
WPC door frame profiles, ready to be measured and specified.

How To Read A Frame Size

The first number is the width of the frame and the second is its thickness. For example, a 100 × 63 mm frame is 100 mm wide, which suits the wall, and 63 mm thick, which suits a heavier door. Lengths are given separately in feet.

Available Frame Sizes

SizeTypeGenerally used for
75 × 50 mm (3" × 2")Single rebateBathrooms, toilets, store rooms and light internal doors
100 × 50 mm (4" × 2")Single rebateBedroom and internal doors in 4" walls
100 × 63 mm (4" × 2.5")Single rebateInternal doors with a heavier shutter
125 × 63 mm (5" × 2.5")Single rebateMain doors and 5" walls
150 × 63 mm (6" × 2.5")Single rebateMain doors and 6" walls
120 × 50, 125 × 63, 150 × 63 mmDouble rebateOpenings with two shutters, such as a main door with a mesh door
60 × 30, 65 × 40, 90 × 45, 90 × 63 mmSingle rebateSmaller openings, cupboards and special requirements
70 × 30, 120 × 50 mmWindow frameWindow chaukhats

General guidance only. Please confirm the right size for your wall and door with our team. All frames are available in 7, 8, 9 and 10 ft lengths, and sizes can be customised on bulk orders.

Matching The Frame To Your Wall

The frame should be close to the finished thickness of the wall, so that it sits neatly in line with the plaster on both sides. Always measure the wall after plastering, or allow for the plaster if you measure the brickwork. If the wall is slightly wider than the frame, the gap is usually covered with a moulding or architrave.

Matching The Frame To Your Door

The thickness of the frame decides how much weight it can comfortably carry. Light internal doors, such as bathroom and store-room doors, generally use the thinner frames. Main doors, solid doors and other heavy shutters are better supported by the thicker frames.

Single Rebate Or Double Rebate?

The rebate is the step in the frame where the door shutter sits. A single rebate frame has one step and holds one shutter. A double rebate frame has a step on both sides, so two shutters can be fitted in the same opening, for example a main door with a mesh door.

Choosing A Profile Model

Greenplastwood frames are available in three profile models. The model changes the look of the frame edge, not its strength.

  • Mould & Groove: a rounded edge with grooves on the back face.
  • Mould & Plain: a rounded edge with a plain back face.
  • Square Model: straight edges for a clean, modern look.
WPC chaukhat Mould and Groove profile drawing
Mould & Groove · 75 mm × 50 mm
WPC chaukhat Mould and Plain profile drawing
Mould & Plain · 75 mm × 50 mm
WPC chaukhat Square Model profile drawing
Square Model · 75 mm × 50 mm

The 75 × 50 mm profile is shown. Tap a drawing to see its exact dimensions.

Choosing A Colour

Choose a frame colour that matches or complements the door and the interior. Light shades such as Light Ivory, Pure White and Beach White suit bright, modern rooms, while Teak Wood, Chocolate Brown and Coco Brown give a warm wooden look. Black works well with contemporary interiors. Frames can also be painted, polished or laminated later if required.

Checklist Before You Order

  1. Measure the finished wall thickness, including plaster.
  2. Choose the frame width closest to your wall thickness.
  3. Choose the frame thickness: the thinner frame for light doors, the thicker frame for heavier or main doors.
  4. Decide between a single rebate and a double rebate frame.
  5. Choose the length that suits the height of the opening.
  6. Select a colour: Light Ivory, Yellow Ivory, Pure White, Beach White, Teak Wood, Chocolate Brown, Coco Brown or Black.
Greenplastwood WPC chaukhat size chart
The complete size chart from our company profile.

Common Mistakes To Avoid

  • Measuring the wall before plastering and ordering a frame that is too narrow.
  • Ordering one size for the whole project without checking walls of different thickness.
  • Forgetting a double rebate frame where a second shutter, such as a mesh door, is planned.
  • Choosing a standard length for an opening that is taller than usual.

Common Questions

Can Frame Sizes Be Customised?

Yes. Sizes and colours can be customised on bulk orders. Share your requirement with our team.

Are WPC Window Frames & Shutters Also Available?

Yes. Window frames and shutters are available in two profiles and are cut, joined and fixed in the same way as door frames.

Can I See A Sample Before Ordering?

Yes. Request a sample of the size and colour you are considering, and our team will help you confirm the right choice.