Living room wall
Interior and exterior wall panels
WPC / PVC Louvers
Fluted wall panels with a wooden look, without termites or upkeep.
Green Plastwood WPC / PVC louvers are pre-finished fluted panels for interior and exterior walls and ceilings. They are 100% water and moisture resistant, termite proof and stain resistant, and they do not deform, rot or fade.
- Series
- 12 mm 2G, 15 mm 8G, 24 mm and exterior
- Panel size
- 200 × 2900 mm (12 mm) · 165 × 2900 mm (15 and 24 mm)
- Designs
- 63, each with a design code
- Finishes
- Wood, marble, stone and solid colours
- Exterior louvers
- 215 × 25 / 26 mm, 8 ft and 10 ft
- Used on
- Walls and ceilings
- ISO 9001:2015 certified
- 63 designs, each with a design code
- Made in our own plants in Gujarat since 2012
About WPC / PVC Louvers
Louvers are fluted panels that give a wall or ceiling the lines and shadow of timber battens. In wood, that look means polish, termite treatment and warping near water. Green Plastwood louvers come pre-finished in wood, marble, stone and solid designs and need none of it.
There are three interior series, 12 mm 2G, 15 mm 8G and 24 mm, each 2900 mm long and in 21 designs, and an exterior louver in three colours for facades and ceilings.
- Exceptional aesthetics
- A wide palette of textures and designs that mimic wood, marble and fabric with high-definition clarity.
- Superior functionality
- 100% water and moisture resistant, durable and low on maintenance, so they suit kitchens and bathrooms where hygiene matters.
- Value for money
- Affordable and long-lasting, with zero maintenance cost.
- Easy installation and long life
- Advanced polymer technology withstands tough conditions, termites and fading. The panels are light, so fitting is quick and clean.
Common to every Green Plastwood WPC product
- UV protection
- Fire retardant
- Eco friendly
- Carpenter friendly
- 100% termite proof
- 100% recyclable
- 100% water proof
- Non toxic
- High density
- Anti corrosion
Louver Series
Three interior series and one exterior profile. Pick a tab to see the details of each.
12 Mm 2G · 200 Series
The widest panel, 200 mm, with two broad flutes. It gives a clean linear texture that suits rooms of normal height.
| Panel size | 200 mm × 2900 mm |
|---|---|
| Thickness | 12 mm |
| Series | 200 Series |
| Designs | 21, each with a design code |
| Generally used for | TV wall backdrops, wardrobes, bedrooms |
15 Mm 8G · 300 Series
A 165 mm panel with eight slim flutes for a denser, finer rhythm on the wall.
| Panel size | 165 mm × 2900 mm |
|---|---|
| Thickness | 15 mm |
| Series | 300 Series |
| Designs | 21, each with a design code |
| Generally used for | Feature walls, bedroom headboard walls, ceilings, reception areas |
24 Mm · 100 Series
The deepest profile. The 24 mm flutes throw a stronger shadow, which reads well on tall walls and from a distance.
| Panel size | 165 mm × 2900 mm |
|---|---|
| Thickness | 24 mm |
| Series | 100 Series |
| Designs | 21, each with a design code |
| Generally used for | Double-height walls, foyers and lobbies |
Exterior Louvers
Co-extruded panels made from recycled hardwood fibre and virgin polymer resin. Pre-finished and ready to install on facades, elevations, boundary walls, ceilings and sunshades.
| Panel size | 215 × 26 mm (Brown) · 215 × 25 mm (Teak, Grey) |
|---|---|
| Standard length | 8 ft and 10 ft |
| Colours | Brown, Teak, Grey |
| Generally used for | Facades, elevations, balcony ceilings, gates |
The Series Side By Side
| 12 mm 2G | 15 mm 8G | 24 mm | Exterior | |
|---|---|---|---|---|
| Series | 200 Series | 300 Series | 100 Series | – |
| Thickness | 12 mm | 15 mm | 24 mm | 25 / 26 mm |
| Panel width | 200 mm | 165 mm | 165 mm | 215 mm |
| Length | 2900 mm | 2900 mm | 2900 mm | 8 ft and 10 ft |
| Flutes | 2 broad flutes | 8 slim flutes | Deep flutes | Box flutes |
| Designs | 21 | 21 | 21 | 3 colours: Brown, Teak, Grey |
| Used | Interior walls and ceilings | Interior walls and ceilings | Interior walls and ceilings | Exterior and interior walls and ceilings |
For rooms with a 9 to 10 ft ceiling, 12 mm 2G or 15 mm 8G gives balanced proportions; 24 mm is generally chosen for taller walls. General guidance only. Read the louver guide
Louver Design Library
All 63 designs across the 200, 300 and 100 series. Filter by series, search a code and tap a design to enquire.
Where Louvers Are Used
Interior and exterior walls and ceilings in homes, offices and commercial spaces.
Living Room
A full wall behind the sofa or the TV unit.
Hallway And Entrance
Wall and partition panels that take daily contact.
Feature Wall
A dark fluted wall behind art or a console.
Lounge And Library
Panelling behind shelves and seating.
Patterned Wall
Panels cut and laid at angles for a headboard wall.
Office Ceiling
Linear ceilings over work areas and reception.
Bungalow Facade
Exterior louvers on elevations and boundary walls.
TV And Bedroom Walls
Warm wood finishes for TV rooms and bedrooms.
From our catalogues
- Kitchen
- Living room
- Bathroom
- TV room
- Bedroom
- Library
- Café and restaurant
- Shopping complex
- Office ceiling
- Bungalow
Exterior Louvers
From our Interior & Exterior catalogue. Made from recycled hardwood fibre and virgin polymer resin with co-extrusion technology: pre-finished, ready to install, water and termite proof and stain resistant.
Brown
215 × 26 mm, 8 ft and 10 ft
Teak
215 × 25 mm, 8 ft and 10 ft
Grey
215 × 25 mm, 8 ft and 10 ft
Installation And Care
The steps from our louver guide. Panels are pre-finished, so there is no polish or paint after fitting.
- Prepare the wall. The plaster should be dry and flat. If the wall is damp or uneven, fix a light aluminium or WPC batten grid at 300 mm centres first.
- Fix the starting trim. Fix the L-angle or J-trim along the skirting and the side corner with countersunk screws.
- Place the first panel. Slot it into the starting trim and check it is plumb with a spirit level.
- Fix the edge. Fasten the groove edge to the wall or frame with clips or fine countersunk screws. No screws show on the finished face.
- Interlock the next panel. Slide its tongue into the groove until it sits tight, and repeat across the wall.
- Cut and finish. Cut panels with a fine-tooth saw and finish the top and corner joints with matching edge profiles.
Care
Dust with a soft cloth or wipe with a damp cloth and mild soap. The surface is stain resistant and needs no polish, coating or touch-up.
Wet Areas
The panels are 100% water and moisture resistant, so they can be used in kitchens and bathrooms.
Ordering Information
What To Tell Us
- Series: 12 mm 2G, 15 mm 8G, 24 mm or exterior
- Design code, e.g. 201, 325 or 114
- Wall or ceiling size, in feet or metres
- Interior or exterior use
- Quantity, if you already know the panel count
- Delivery city
Minimum Order And Customisation
- Interior panels
- 2900 mm long; 200 mm wide (12 mm) or 165 mm wide (15 and 24 mm)
- Exterior panels
- 8 ft and 10 ft long, 215 mm wide
- Minimum order
- Ask our team for stock and minimum quantity
Samples And Support
Printed and screen colours vary. Ask for a sample of the design code you like before you order, and send us the wall size so we can work out the number of panels.
Catalogues To Download
One catalogue for each interior series, and the Interior & Exterior catalogue for exterior louvers.
Louvers 12 mm 2G200 Series, 21 designs. 9 pages.Download PDF ↓
Louvers 15 mm 8G300 Series, 21 designs. 9 pages.Download PDF ↓
Louvers 24 mm100 Series, 21 designs. 9 pages.Download PDF ↓
Interior & ExteriorExterior louvers, cladding, decking, pergola. 23 pages.Download PDF ↓Guides
WPC / PVC Louvers: Common Questions
What sizes do WPC louvers come in?
Three interior series: 12 mm 2G panels are 200 mm × 2900 mm; 15 mm 8G and 24 mm panels are 165 mm × 2900 mm. Exterior louvers are 215 × 25 or 26 mm in 8 ft and 10 ft lengths.
How many designs are available?
63 designs: 21 in each of the 200, 300 and 100 series, in wood grains, marble, stone and solid colours. Share the design code, for example 201 or 325, when you enquire.
Which series should I choose?
For rooms with a 9 to 10 ft ceiling, 12 mm 2G or 15 mm 8G gives balanced proportions. The 24 mm profile is generally chosen for taller walls and larger spaces, where the deeper flutes can be seen from a distance. This is general guidance; our team can advise for your wall.
Can louvers be used in bathrooms and kitchens?
Yes. The panels are 100% water and moisture resistant and easy to clean, so they suit kitchens, bathrooms and other humid areas.
Are WPC louvers suitable for exterior walls?
Yes. Exterior louvers, 215 mm wide, are made for facades, elevations and ceilings and do not rot, deform or fade.
How are louvers installed?
On a dry, flat wall the first panel is set into a starting trim and checked for plumb, then each panel is fixed along its edge and the next panel slides into it, so no screws show. On an uneven or damp wall a batten frame is fixed first.
Do louvers need polishing or painting?
No. All 63 designs come pre-finished, so there is no polish, coating or touch-up.
How do I clean them?
Dust with a soft cloth or wipe with a damp cloth and mild soap. The surface is stain resistant.
- Since 201213 years of WPC manufacturing
- 3 Plantsmanufacturing in Gujarat
- 300+ Projects50+ stock points · 4+ export countries
- ISO 9001:2015certified · lab-tested products
Get A Quote For WPC / PVC Louvers
Share 4 details and we will call you back with price, sizes and stock.
More Green Plastwood Products
WPC Chaukhat
Door frames in single and double rebate, 12 sizes, 8 colours.
View details
WPC Doors
Solid, 3 layer, texture and digital print doors, 112 designs.
View details
WPC Sheets & Boards
WPC / PVC boards and 3 layer boards, 5 to 35 mm, 8 × 4 ft.
View details
WPC Window Frame
Window frame profiles in 70 × 30 and 120 × 50 mm.
View details