WPC Wall Cladding And Pergolas: Step-By-Step Guide

Greenplastwood · SNG Eco India Pvt. Ltd. · Updated October 2026

Facades, ceilings, terraces and gardens need a material that looks like wood but does not rot, fade or need regular painting. Greenplastwood WPC cladding boards, planks and hollow profiles bring the warmth of timber to exterior spaces with very little maintenance.

Exterior wall finished with WPC cladding boards
WPC wall cladding on a villa facade.

The Exterior Product Range

ProductSizeLengthFinishGenerally used for
WPC Wall Cladding145 × 20.5 mm8 ft, 10 ftBrushing, sandingFacades, house elevations and ceilings
WPC Planks142 × 10 mm8 ft, 10 ftBrushing, sandingBalconies, ceilings, gates and railings
Pergola And Rafter Profiles48 × 38, 120 × 60 and 150 × 150 mm8 ft, 10 ftBrushingPergolas, gazebos, sunshades, baffle ceilings and partitions

Cladding boards and planks are available in Teak, Brown and Grey.

Why Choose WPC For Exteriors

  • Long-lasting appearance: the boards are highly resistant to fading and discolouration.
  • Weather protection: the interlocking assembly keeps water away from the building structure.
  • Insulation: hollow-core technology adds insulation to the wall.
  • No periodic maintenance: no painting, oiling or varnishing is needed.
  • Lightweight profiles: hollow pergola profiles replace heavy steel frames and wood that need regular painting.

Planning An Exterior Project

  • Choose the product: cladding boards for facades and ceilings, planks for railings, gates and screens, and hollow profiles for pergolas, sunshades and partitions.
  • Choose the colour: Teak, Brown or Grey, to suit the rest of the elevation.
  • Plan the substructure: decide how the frame will be fixed to the wall or roof before the boards arrive.
  • Plan the edges: corners, top edges, windows and ends need trims or flashing for a clean finish.
  • Share the drawings: send the elevation or area sizes to our team to plan quantities and fixing details.

Installing Wall Cladding

  1. Fix the substructure: install the substructure on the wall using brackets. The cladding is fixed to this frame, not directly to the wall.
  2. Fix the first board: place the first board at the bottom and screw it to the substructure through its fixing edge.
  3. Interlock the next boards: fit each board into the one below it. The interlocking joint hides the screws and keeps rainwater out.
  4. Finish the corners: use corner angles at external corners for a neat, closed edge.
  5. Finish the top: close the top edge with a flashing panel to keep water out of the cladding.
  6. Ceilings: for a ceiling, hang the substructure from suspension rods, fix the cladding in the same way and finish the ends with wall angles.
House elevation finished with WPC wall cladding
WPC wall cladding on a house elevation.

Installing A Pergola

  1. Mark the posts: lay out the location of each post.
  2. Fix the knife plates: install the knife plates with anchor bolts.
  3. Level the posts: check whether any post needs to be trimmed at the bottom so all posts are the same height.
  4. Prepare the posts: cut and prepare each post for the beams.
  5. Stand the posts and set the beams: fix the posts on the knife plates and place the support beams.
  6. Seal the joints: caulk the joints on top of the posts with exterior caulk to keep moisture out.
  7. Fix the knee braces: hold each knee brace in place with a screw, then fasten it with lag screws.
  8. Install the rafters: place the rafters on the support beams.
  9. Fasten the rafters: screw each rafter to the support beams on both sides.
  10. Fit the shade planks: install the shade planks at equal spacing.
  11. Finish: plug the screw holes and touch up the surface.
WPC pergola on a terrace with seating
A WPC pergola on a rooftop terrace.

Tip: for larger spans, the catalogue details show WPC profiles fixed on a steel substructure with reinforcement. Share your design with our team and we will advise the right fixing detail.

Common Questions

Does WPC Cladding Fade In The Sun?

Greenplastwood WPC cladding is highly resistant to fading and discolouration, and keeps its look for years without periodic maintenance.

How Is Exterior WPC Maintained?

Rinse it with water from time to time to remove dust. No painting, oiling or varnishing is needed.

Can WPC Cladding Be Used On Ceilings?

Yes. Our catalogue includes ceiling and false-ceiling details, and cladding and planks are commonly used on ceilings and balcony soffits.

What Can WPC Hollow Profiles Be Used For?

Besides pergolas and gazebos, the hollow profiles are used for rafters, baffle ceilings, panelled partitions, staircase partitions and sunshades.